T&S Brass Pre-Rinse Spray Station Repair in Lee, MA
Need T&S Brass pre-rinse spray station repair in Lee, MA? We find the actual cause, explain it in plain terms, give you a price before we start and back the finished repair with a 90-day parts-and-labor warranty.
- Upfront quote before work
- 90-day parts & labor warranty
- Parts matched to your model
- Same-day service when available
Repairing T&S Brass Pre-Rinse Spray Stations
Repairs on a T&S Brass pre-rinse spray station go faster when the part is matched to the model. We record the model and serial number at the start of the visit and check the manufacturer's service information for that unit.
How we repair your T&S Brass Pre-Rinse Spray Station
A pre-rinse spray station is a commercial faucet assembly with a spring-mounted hose and spray valve used to blast food off dishes before they go into the dishwasher. Every pre-rinse spray station uses a water inlet valve, a wash or circulation pump, spray arms, a heater, a drain pump and a control with sensors. A technician checks fill, wash, heat and drain steps one at a time to find the failed part.
Commercial dishwashers must hit sanitizing temperatures for health code compliance, so a failed heater or booster is a priority call.
T&S Brass Pre-Rinse Spray Station repair at a glance
- Typical repair cost$75–$250
- Typical service life5–10 years
- Warranty on repairs90 days parts & labor
- QuoteUpfront, before work
- Same-day visitsWhen available
Common T&S Brass Pre-Rinse Spray Station problems we fix
What usually causes each symptom, and what our technician checks to confirm it.
Spring or riser is loose or wobbles
- Likely causes
- A loose wall bracket, a missing set screw or a worn riser connection.
- What our technician checks
- The wall bracket, riser and set screws are inspected and tightened.
Hose leaks or bursts
- Likely causes
- A worn or kinked hose from repeated flexing or contact with hot surfaces.
- What our technician checks
- The hose is inspected along its length and at the fittings.
Water temperature will not mix
- Likely causes
- Worn cartridges or stems, failed check valves allowing crossover, or a closed supply stop.
- What our technician checks
- Cartridges, stems and check valves are inspected and supply stops are checked.
Add-on faucet will not shut off
- Likely causes
- A worn stem washer or cartridge in the add-on faucet.
- What our technician checks
- The add-on faucet stem or cartridge is inspected and rebuilt.
Weak spray
- Likely causes
- A clogged spray face, debris in the check valves or low supply pressure.
- What our technician checks
- The spray face and check valves are cleaned and supply pressure is measured.
Spray valve leaks or drips
- Likely causes
- A worn valve seat or O-ring, a cracked spray head or a loose hose connection.
- What our technician checks
- The spray valve is disassembled and the seat, O-rings and threads are inspected.
Quick checks you can do safely
- Unscrew and clean the spray face holes.
- Check both supply stops under the station are open.
- Look for kinks or cracks along the hose.
- Tighten the hose nut at the spray valve by hand.
- Make sure the spray valve handle springs back fully.
Safety first: Pre-rinse water is very hot, so point the spray valve down into the sink when testing it.
Still not working?
Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.
(844) 442-1999Seeing a code? Try our error code lookup or troubleshooting wizard.
Our 5-step pre-rinse spray station repair process
- Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
- DiagnosisThe technician inspects and tests the pre-rinse spray station to find the actual cause, not just the symptom.
- Upfront quoteYou get a clear price before any work starts. No surprise charges.
- RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
- Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
T&S Brass Pre-Rinse Spray Station repair cost and lifespan
National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.
Parts we replace most often
- Spray valve
- Flexible hose
- Overhead spring
- Wall bracket
- Faucet cartridges
- Check valves
- Spray face
We match every part to your model and serial number.
Keep your T&S Brass Pre-Rinse Spray Station running longer
- Clean the spray face weekly.
- Check the wall bracket for looseness monthly.
- Replace the hose at the first sign of wear.
- Rebuild valves before drips become constant.
- Keep the hose away from hot equipment.
Build a maintenance plan
Create a printable monthly, quarterly and yearly checklist for every appliance in your home.
Open the schedule generatorT&S Brass Pre-Rinse Spray Station repair in Lee, MA
Long winters and humid summers in Massachusetts keep dryers, ovens and refrigerators in Lee busy all year.
We provide pre-rinse spray station repair throughout Lee, including ZIP code 01238, and in nearby Lenox, Becket and Pittsfield.
Pre-Rinse Spray Station brands we repair
Frequently Asked Questions
How much does T&S Brass pre-rinse spray station repair cost in Lee, MA?
Most T&S Brass pre-rinse spray station repairs fall roughly between $75 and $250, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.
Can you repair my T&S Brass pre-rinse spray station the same day?
Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.
Is the repair guaranteed?
Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.
Which brands do you service?
We work on all major brands, including Fisher, Krowne and T&S Brass.
Should I repair or replace my T&S Brass pre-rinse spray station?
A typical T&S Brass pre-rinse spray station lasts about 5 to 10 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.
Other dishwashers repairs
- Dishwasher Repair
- Utensil Washer Repair
- Built-in Dishwasher Repair
- Conveyor/Flight Dishwasher Repair
- Glass Washer Repair
- Drawer Dishwasher Repair
- Portable/Countertop Dishwasher Repair
- Pot and Pan Washer Repair
- Door-Type Dishwasher Repair
- Undercounter Dishwasher Repair
More repair services
Get your pre-rinse spray station fixed in Lee
Upfront quote before work starts · Parts matched to your model · 90-day warranty